The key to evaluating the quality of a gas spring is to consider the following aspects:
1. Sealing, if the airtightness is not very good, there will be oil seepage, steam leakage and other conditions in the whole process of application;
2. Accuracy, for example, the gas spring must be 500N, and the force deviation produced by some manufacturers does not exceed 2N, and the goods of some manufacturers will be far away from the actual necessary 500N;
3. The service life is calculated because it can be completely scalable;
4. The force value change in the stroke arrangement, the air spring under the ideal situation should be consistent in the force value in the whole stroke arrangement.
However, due to the design scheme and the factors of production and processing, the force value of the gas spring in the stroke arrangement is inevitably changed. The strength of the transformation is the key specification to consider the cost-effective ring of a gas spring, the smaller the strength of the transformation, the higher the quality of the gas spring, and the worse it is!
