Blog

In practice, the pressure spring should be able to maintain its working length even if the force is beyond the elastic limit of the raw material.

The spring is twisted due to the gap caused by the spring vibrating up and down, and the spring is more stable if there is preload.

A spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and return to their original shape afte

Strain spring tempering solution refers to the application of tensile stress equivalent to 20% ~ 40% of tensile strength at both ends of the tempered steel wire, the steel wire cau

With the development of science and technology, the standard of living is getting higher and higher, and the production of many products is intelligent, and there are fewer and few

A spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed by external force and return to their original shape after the external for

The force value change in the stroke arrangement, the air spring under the ideal situation should be consistent in the force value in the whole stroke arrangement.

The initial reading of the load test is described as F0 and its length and short number, and then loaded again to make the reading transition value of the long and short omen achie

Put the spring into the detergent with cold water dilution, the dilution ratio of cold water and detergent is 1:1 or 1:2, and the soaking time is not too long.

There are many types of springs, and their main uses are very common, and many customers now go to manufacturers to order, and the total number is more or less.

With the improvement of industrial products, spring products have become more colorful, the use of spring batches has gradually increased, and the technology-related springs have g

It is widely used in life, such as automobile suspension springs, shock absorbing springs in the lower part of trains, spring scales in life, and springs in dynamometers.